24/7 calls & call out available +44(0)1782 497000

Contactor Series LC1F330 Schneider - AC3: 160kW 330A at 400V LC1F

Schneider

(No reviews yet) Write a Review
SKU:
LC1F330
EAN/UPC:
3389110230895
Condition:
New
Availability:
Ships the same day if ordered before 2pm.
Weight:
9.00 KGS
Shipping:
Calculated at Checkout
List Price: £1,511.82
£1,058.27
(You save £453.55 )
Contactor Series LC1F330 Schneider - AC3: 160kW 330A at 400V LC1F

Currently out of stock. Please ask for availability.

Try to see FAQ for possible quick answer.

Product Overview

Attributes
Series TeSys F
Application Motor Control
Power Rating AC-3 100kW @ 230V | 160kW @ 400V | 180kW @ 415V | 200kW @ 440/500V | 220kW @ 690V | 160kW @ 1000V
Current Rating 400A @ 440V AC-1 | 330A @ 440VAC AC-3
Voltage Rating 1000VAC 50/60Hz, 460VDC
Rated Withstand Voltage 8kV
Standards IEC / EN 60947-4-1 | JIS C8201-4-1

 

Contactor LC1F330 AC3 @ 400V 160kW

 

With recent global supply shortages, well-stocked suppliers like Axxa are crucial to keep you operational.
We stock all combinations of contactors, ready to easily replace your contactor should it fail, no matter which manufacturer.

- Speak to fully trained staff straight away
- Your solution is on our shelf
- Same day deliveries available
- Installation service available

Read More
mechan controls MS5 group picture

Call us first on 01782 497000 or follow the instructions below on how to choose what you need.

Main Pole Number

2, 3 or 4. Labelled L1, L2, L3, L4 at the top, and T1, T2, T3, T4, at the bottom.

Auxiliary Contact Configuration

Separate to the main poles, these can be any combination in quantity of what's called 'Normally Open (NO)' and 'Normally Closed (NC)' contacts added to the front and/or side of the contactor.

Label Format: 2-digit number ending in 3 or 4 for Normally Open (NO), 2-digit number ending in 1 or 2 for Normally Closed (NC). Usually something like 13, 14 (for NO) or 21, 22 (for NC).

mechan controls MS5 group picture

Power rating

You are looking for the kW (kilowatt) value shown on the AC3 table on or around 400V. This is usually a sticker on the front or side of the contactor.
You can select a value a bit higher than your contactor but not lower.

mechan controls MS5 group picture

Coil Voltage

Often called the Control Voltage and often a lower voltage value than the main power voltage.

This is the most common mistake people make when ordering contactors. The voltage can be AC and/or DC and it is often found somewhere separate from the main information sticker. Always labelled A1 and A2.

mechan controls MS5 group picture

Other things to consider:

Is there installation space on the front and side?
Is there anything physically attached to the contactor? Example: Overload relay, time delay modules, other contactors etc)
Not sure about any of the above? We can guide you through this over the phone/email/live chat.

Reviews

(No reviews yet) Write a Review
We send out stock every week to our subscribers and sometimes also produce news about the latest jobs and updates. *You can opt out at anytime.*